Perfect for Replacing Broken Antique Lock Sets on Interior Doors, Features 2″ Outside Diameter Knobs Classic Bronze – Defender Security E 2537 Mortise Style Fluted Glass Door Knobs

#ad
Prime-Line Products E 2537 #ad - Has glass, diecast and steel components. Projection and 17/64 in. 20 threads. X 3-1/2 in. If your door knob set is acting up or broken, this E 2537 Mortise style fluted glass door knob set is the perfect choice for updating and fixing hardware on interior doors. For matching rosettes see Prime-Line’s model number E-2543.

Outside diameter knobs with 1-15/16 in. With a beautiful and classic fluted glass and bronze finish, it’s the perfect choice for your antique or vintage interior doors. With beautiful classic fluted glass and classic bronze finish, it's the perfect choice for your next project. Replace antique knob sets - this e 2537 Mortise lock set is the perfect choice for replacing broken knobs on old or antique/vintage interior doors.

Perfect for Replacing Broken Antique Lock Sets on Interior Doors, Features 2" Outside Diameter Knobs Classic Bronze - Defender Security E 2537 Mortise Style Fluted Glass Door Knobs #ad - Beautiful, classic design - the design of these clear glass fluted knobs with a classic bronze finished knob base will fit perfectly into a vintage or antique style door. Easy installation  - installation is quick and easy. This classic style door knob set fits square drive spindle systems commonly found in antique and vintage door hardware sets, and it can adjust to accommodate different door thicknesses.

Installation tip #2: apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately. Note: this item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware.

Fluted glass knob set - the e 2537 fluted glass door knob set is ideal for replacing or updating interior door hardware.

#ad



Prime-Line E 2543 Door Knob Rosettes, 2-1/2 in. Outside Diameter, Steel, Classic Bronze Finish

#ad
Prime-Line Products E 2543 #ad - Mounting hole center spacing. Stamped steel construction. Outside diameter x 11/16 inside diameter with 2 in. 2-1/2 in. Classic bronze finish. Approximate size pre-bored *holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Installation tip #1: products like fix-it-all and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

These door knob rosettes are used with vintage style door knobs mounted on square spindles. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware by Prime-Line Products and other classic hardware manufacturers. The large 2-1/8 in. Hole centers. Note: if attempting to use these rosettes on doors with large, pre-drilled knob holes, the fasteners of these rosettes require a solid surface to mount to.

Prime-Line E 2543 Door Knob Rosettes, 2-1/2 in. Outside Diameter, Steel, Classic Bronze Finish #ad - Installation tip #2: apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately. These vintage style door knob rosettes are constructed of stamped steel and come in a classic bronze finish. These rosettes feature an outside diameter of 2-1/2 inches, an inside diameter of 11/16 inches and have a 2 in.

#ad



Perfect for Replacing Antique Lock Sets and More, Fits Doors with 2-3/8" Backset - Prime-Line E 2497 Mortise Keyed Lock Set with Glass Knob

#ad
Prime-Line Products E 2497 #ad - No matter what interior door you're fixing, this classic lock set will add the perfect finishing touch. Lock bolt key - this door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside. Outside diameter x 11/16 inside diameter with 2 in.

These door knob rosettes are used with vintage style door knobs mounted on square spindles. Installation tip - Use of thread locking adhesive on the set screw will keep knob from slipping. Beautiful, traditional glass knob lock set - the e 2497 glass knob set is the perfect choice for replacing or updating interior door hardware.

Perfect for Replacing Antique Lock Sets and More, Fits Doors with 2-3/8" Backset - Prime-Line E 2497 Mortise Keyed Lock Set with Glass Knob #ad - New installation fit - this lock set is perfect for interior doors with a 2-3/8" backset. 2-1/2 in. Classic bronze finish. Whether you’re replacing the lock set on your antique doors or just love the traditional look of a glass knob, this E 2497 Mortise Lock set is the perfect choice for fixing hardware on interior doors.

With a classic bronze plated steel trim and beautiful glass knob, it's the perfect choice for your next project. Left or right hand installations - The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors. Replace antique lock sets - this e 2497 mortise lock set is the perfect choice for replacing knobs on old doors.

#ad



Reversible Latch Bolt - Prime-Line E 2294 Vintage Style Indoor Mortise Lock Assembly Kit - Backset, 1/4" Max Square Spindle - Cast Steel Construction, Brass Plated Finish, Antique Skeleton Key

#ad
Prime-Line Products E 2294 #ad - The kit includes a latch and deadbolt strike with fasteners door knobs, square spindle, spare keys and trim plates sold separately and two skeleton-style keys. Left or right-handed interior doors - The mortise caselock ships handed to close in a certain direction but the latch can easily be reversed for opposite swinging doors.

Installation tip - although the square drive on the latch has a 9/32" opening, it will only accommodate 1/4" square spindles. Products like fix-it-all and bondo body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Classic bronze finish.

When it’s time to replace damaged or missing vintage-style mortise door locks, look no further than Prime-Line’s E 2294 Mortise Lock Assembly Kit. Installation of the brass-plated steel mortise lock set is quick and easy, and all mounting screws are included. Stamped steel construction. 2-1/2 in. Installation tip: because the fasteners of the rosettes purchased separately require a solid surface to mount to, the large 2-1/8 in.

Reversible Latch Bolt - Prime-Line E 2294 Vintage Style Indoor Mortise Lock Assembly Kit - Backset, 1/4" Max Square Spindle - Cast Steel Construction, Brass Plated Finish, Antique Skeleton Key #ad - Approximate size holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. These door knob rosettes are used with vintage style door knobs mounted on square spindles. The cast steel construction and brass plated finish closely match the mortises of period homes and are perfect for antique doors.

#ad



Defender Security E 2499 Door Knob Set with Spindle, Oil Rubbed Bronze,Pack of 1

#ad
Prime-Line Products E 2499 #ad - Stamped steel construction. 2-1/2 in. It has a 2-3/8" backset with a 9/32" square spindle drive that accepts a maximum spindle size of 1/4". Steel with brass-plated finish - the e 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. Square spindle shaft.

Hole centers. New installation fit - this lock set is perfect for interior doors with a 2-3/8" backset. Outside diameter x 11/16 inside diameter with 2 in. Fits various exterior and interior locksets. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. These door knob rosettes are used with vintage style door knobs mounted on square spindles.

Defender Security E 2499 Door Knob Set with Spindle, Oil Rubbed Bronze,Pack of 1 #ad - Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. Easy installation - installation is quick and easy, and all mounting screws are included. Beautiful, traditional glass knob lock set - the e 2497 glass knob set is the perfect choice for replacing or updating interior door hardware.

2-1/4in. Classic bronze finish. This style knob is used on various exterior and interior locksets.

#ad



Cast Steel Construction, Brass Plated Knobs, Antique Skeleton Key Locking System - Prime-Line E 2437 Vertical Trim Vintage Lock Set - 2-1/2" Backset, Surface Mounted on Right-Hand Swing-In Interior Doors

#ad
Prime-Line Products E 2437 #ad - Handing is determined from facing the door in the interior side of the door. Matches antique hardware - the beautiful vertical trim lock set is constructed of durable black painted cast steel with brass plated steel knobs and rosettes. The vertical mount lock set has a 2-1/2” backset. No matter what interior door you're fixing, this classic lock set will add the perfect finishing touch.

Lock bolt key - this door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside. Replace antique mortise lock sets - the vintage look of the prime-Line E 2294 Mortise Lock Assembly Kit is a great match for the old lock sets found in period homes.

Cast Steel Construction, Brass Plated Knobs, Antique Skeleton Key Locking System - Prime-Line E 2437 Vertical Trim Vintage Lock Set - 2-1/2" Backset, Surface Mounted on Right-Hand Swing-In Interior Doors #ad - When it’s time to replace damaged or missing vintage-style surface-mounted door locks, look no further than Prime-Line E 2437 Polished Brass Vertical Trim Lock Set. These door knob rosettes are used with vintage style door knobs mounted on square spindles. 2-1/4in. Handing is determined from facing the door in the interior side of the door.

It is designed for surface-mounted installations on interior doors, and it features an antique skeleton key locking system. Keyed alike - the prime-line 2437 vertical trim lock set includes a latch bolt and deadbolt with all locks keyed alike. The mortise lock easily slides into the existing door pocket for an fix for a broken lock.

#ad



Lucky Line 87202 Skeleton Keys

#ad
Lucky Line 87202 #ad - 2-1/2 in. The kit includes a latch and deadbolt strike with fasteners door knobs, square spindle, spare keys and trim plates sold separately and two skeleton-style keys. Left or right-handed interior doors - The mortise caselock ships handed to close in a certain direction but the latch can easily be reversed for opposite swinging doors.

Installation tip - although the square drive on the latch has a 9/32" opening, it will only accommodate 1/4" square spindles. Solid brass construction. Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. Easy installation - installation is quick and easy, and all mounting screws are included.

Lucky Line 87202 Skeleton Keys #ad - Lucky line skeleton Key - For use on french doors and other antique door hardware. Fits various exterior and interior locksets. Handing is determined from facing the door in the interior side of the door. Matches antique hardware - the beautiful vertical trim lock set is constructed of durable black painted cast steel with brass plated steel knobs and rosettes.

Generic cuts are designed to fit most antique door locks. It is designed for surface-mounted installations on interior doors, and it features an antique skeleton key locking system. Keyed alike - the prime-line 2437 vertical trim lock set includes a latch bolt and deadbolt with all locks keyed alike.

#ad



Prime-Line Products Classic Bronze Prime-Line E 2495 Mortise Keyed Knob - Perfect for Replacing Broken Antique Lock Sets and More, Fits 1-3/8 in-1-3/4 in. Interior Doors

#ad
Prime-Line Products E 2495 #ad - Diameter knob with 1/4 square spindle. 2-1/2 in. It can be used as a privacy lock on bedrooms, bathrooms and other interior doors. Spare keys for these locks are available by special order from the manufacturer. Taiwan. If your lock set is acting up or broken, this E 2495 Mortise Lock set is the perfect choice for updating and fixing hardware on interior doors.

Classic bronze finish. Outside diameter x 11/16 inside diameter with 2 in. Fits various exterior and interior locksets. When you’re updating hardware on older interior doors in your home, this E 2495 Mortise Keyed Lock Set with Classic Bronze Knob is the perfect choice! This lock set fits 1-3/8 in. 1-3/4 in.

Prime-Line Products Classic Bronze Prime-Line E 2495 Mortise Keyed Knob - Perfect for Replacing Broken Antique Lock Sets and More, Fits 1-3/8 in-1-3/4 in. Interior Doors #ad - Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. Easy installation - installation is quick and easy, and all mounting screws are included. Interior doors. Beautiful, classic bronze knob lock set - the e 2495 bronze knob set is ideal for replacing or updating interior door hardware.

Interior doors, and can be easily installed. It has a 2-3/8" backset with a 9/32" square spindle drive that accepts a maximum spindle size of 1/4". Steel with brass-plated finish - the e 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish.

#ad



Belwith Products 1142 Mortise Trim Plate, Brass

#ad
BELWITH PRODUCTS LLC 1142 #ad - Beautiful, traditional glass knob lock set - the e 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. Pair with screws. Stamped steel construction. New installation fit - this lock set is perfect for interior doors with a 2-3/8" backset. Polished brass finish. Spare keys for these locks are available by special order from the manufacturer.

Taiwan. Classic bronze finish. These door knob rosettes are used with vintage style door knobs mounted on square spindles. With a classic bronze plated steel trim and beautiful glass knob, it's the perfect choice for your next project. Left or right hand installations - The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors.

Belwith Products 1142 Mortise Trim Plate, Brass #ad - Replace antique lock sets - this e 2497 mortise lock set is the perfect choice for replacing knobs on old doors. Hole centers. Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. Easy installation - installation is quick and easy, and all mounting screws are included.

Constructed from brass plated steel. They have been bringing the very best decorative and functional hardware products to your home, with the highest quality.

#ad



4" Universal Door Knob Spindle

#ad
Progressive Hardware Co. Inc. #ad - 20 tpi. It has a 2-3/8" backset with a 9/32" square spindle drive that accepts a maximum spindle size of 1/4". Steel with brass-plated finish - the e 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. New installation fit - this lock set is perfect for interior doors with a 2-3/8" backset.

Classic bronzed finish. Handing is determined from facing the door in the interior side of the door. Matches antique hardware - the beautiful vertical trim lock set is constructed of durable black painted cast steel with brass plated steel knobs and rosettes. Standard 9/32" Thickness. Hole centers. No matter what interior door you're fixing, this classic lock set will add the perfect finishing touch.

4" Universal Door Knob Spindle #ad - Lock bolt key - this door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside. Replace antique mortise lock sets - the vintage look of the prime-Line E 2294 Mortise Lock Assembly Kit is a great match for the old lock sets found in period homes.

Used on various bit key mortise locksets. New installation fit - this lock set is ideal for replacing broken lock sets on 1-3/8 in. 1-3/4 in.

#ad



Defender Security E 2498 Vintage Style Door Knobs w/Satin Nickel Finish, 2-1/4 in. Outside Diameter, Steel

#ad
Prime-Line Products E 2498 #ad - Features 2-1/4 in. These door knob rosettes are used with vintage style door knobs mounted on square spindles. The kit includes a latch and deadbolt strike with fasteners door knobs, square spindle, spare keys and trim plates sold separately and two skeleton-style keys. Left or right-handed interior doors - The mortise caselock ships handed to close in a certain direction but the latch can easily be reversed for opposite swinging doors.

Installation tip - although the square drive on the latch has a 9/32" opening, it will only accommodate 1/4" square spindles. Solid brass construction. 20 threads. With a classic bronze finish, it's a great choice for your next project. Left or right hand installations - The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed.

Defender Security E 2498 Vintage Style Door Knobs w/Satin Nickel Finish, 2-1/4 in. Outside Diameter, Steel #ad - Replace antique lock sets - this E 2293 Mortise lock set is the perfect choice for replacing broken knobs on old doors. Lock bolt key - this door lock set can be used as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside. Brass plated Steel Mortise Trim Plate.

Approximate size holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Installation tip #2: apply a small amount of Loctite ThreadLocker 271 to the set screw threads in the event they are loosening – Loctite purchased separately.

#ad