Graco 238358 BlueMax II Whip Hose for Airless Paint Spray Guns, 3/16-Inch x 3-Feet

#ad
Graco 238358 #ad - Great for spraying tight areas and for finish work. Attaches between the gun and standard hose. Better control at the gun. Lightweight and flexible. Great for spraying tight areas and for finish work. Lightweight and more flexible for better control at the gun as well as less operator fatigue. Attaches between the gun and standard hose.

Graco 238358 BlueMax II Whip Hose for Airless Paint Spray Guns, 3/16-Inch x 3-Feet #ad - One male end, one female end with zinc plated spring guards on both ends. Less operator fatigue.

#ad



Graco 243025 Hose Connector, 1/4" x 1/4"

#ad
Graco 243025 #ad - Hose connector is for projects where a longer hose reach is needed. X 1/4 in. For use with most airless paint hoses. Hose connector measures 1/4 in. This is a 1/4" m nipple rated at 5000 psi. It is made to fit Graco or any other paint spray hose. Consult sprayer manual for maximum hose length supported.

#ad



Graco FFLP310 Fine Finish Low Pressure RAC X Reversible Tip for Airless Paint Spray Guns

#ad
GRACO FFLP310 #ad - Less overspray & Easiest pattern overlap. Works with any airless sprayer when used with a RAC X base. Hose connector measures 1/4 in. Hose connector is for projects where a longer hose reach is needed. Reduces prep and cleanup - you put the paint where you want it. Soft spray fan pattern makes it easy to apply any material to any surface.

Featuring the patented Graco RAC X Tip with SmartTip Technology. Delivers the industry's best finish at the lowest airless spray pressure. Spraying at half pressure doubles the life of the tip. Sprays at up to 50% lower pressure with less overspray to provide consistent blended finish quality with complete atomization.

Graco FFLP310 Fine Finish Low Pressure RAC X Reversible Tip for Airless Paint Spray Guns #ad - Consult sprayer manual for maximum hose length supported. Featuring patent pending smarttip technology, stains, Graco's exclusive internal tip geometry reduces the energy required to atomize your favorite paints, and other materials - delivering a superior finish with less pressure. Up to 2x life & sprays at up to 50% Lower Pressure.

. X 1/4 in. For use with most airless paint hoses. Works with most airless guns when used with a Graco RAC X Base.

#ad



Graco 246215 RAC X 7/8-Inch HandTite Tip Guard Base for Airless Paint Spray Guns with 22-Millimeter Thread

#ad
Paint Sundries Solutions 246215 #ad - X 1/4 in. For use with most airless paint hoses. The guard acts as a safety device to prevent a person coming into contact with the tip when spraying and also holds the paint sprayer tip in place. Less overspray & Easiest pattern overlap. Up to 2x life & sprays at up to 50% Lower Pressure. Hose connector is for projects where a longer hose reach is needed.

Hose connector measures 1/4 in. Works with most airless guns when used with a Graco RAC X Base. This guard is not compatible with Graco's RAC V and IV spray tips. Fits all graco products except old-style pole guns. Consult sprayer manual for maximum hose length supported. Featuring the patented Graco RAC X Tip with SmartTip Technology.

Graco 246215 RAC X 7/8-Inch HandTite Tip Guard Base for Airless Paint Spray Guns with 22-Millimeter Thread #ad - Delivers the industry's best finish at the lowest airless spray pressure. The graco reverse a clean airless spray guard attaches to all airless spray guns that are 7/8" thread.

#ad



Graco 247340 1/4-Inch Airless Hose, 50-Foot

#ad
Graco 247340 #ad - Minimal hose coil memory reduces tangling and kinks when uncoiling or coiling or moving the hose around the project. Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance. Includes 1/4 in. Delivers the industry's best finish at the lowest airless spray pressure.

Consult sprayer manual for maximum hose length supported. Works with most airless guns when used with a Graco RAC X Base. The guard acts as a safety device to prevent a person coming into contact with the tip when spraying and also holds the paint sprayer tip in place. Zinc-plated spring guards are corrosion resistant.

Graco 247340 1/4-Inch Airless Hose, 50-Foot #ad - Hose connector is for projects where a longer hose reach is needed. Graco duraflex airless paint Hose with it's superior flexibility and durability is designed for ease of use while spraying under pressure. Includes 1/4 in. Featuring the patented Graco RAC X Tip with SmartTip Technology. X 1/4 in. For use with most airless paint hoses.

Connector.

#ad



Graco 246385 7/8-Inch UNF Inlet Strainer Screen for Airless Paint Spray Guns

#ad
Paint Sundries Solutions 246385 #ad - Pump inlet filters help prevent debris from being suctioned into the pump, causing damage to your sprayer. Fits graco 390, ultra 395 & 495 Models. X 1/4 in. For use with most airless paint hoses. Hose connector measures 1/4 in. Less overspray & Easiest pattern overlap. Fits all graco products except old-style pole guns.

Fits graco, spraytech, Wagner, Titan and other paint pumps. Replacement part. By 1/4 in. Maximum working pressure is 3000 psi. Delivers the industry's best finish at the lowest airless spray pressure. Consult sprayer manual for maximum hose length supported. Up to 2x life & sprays at up to 50% Lower Pressure. Connector.

Graco 246385 7/8-Inch UNF Inlet Strainer Screen for Airless Paint Spray Guns #ad - Zinc-plated spring guards are corrosion resistant. Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance. For use with magnum or Graco Airless Paint Sprayers. Hose connector is for projects where a longer hose reach is needed. Consult sprayer manual for maximum hose length supported.

#ad



Graco 240794

#ad
Graco 240794 #ad - Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance. Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs. This guard is not compatible with Graco's RAC V and IV spray tips. X 1/4 in. For use with most airless paint hoses.

Consult sprayer manual for maximum hose length supported. You will feel the difference. Fits all graco products except old-style pole guns. Hose connector is for projects where a longer hose reach is needed. Hose measures 50 ft. Connector. Over 10-percent lighter weight and increased hose flexibility improves usability while spraying under pressure.

Graco 240794 #ad - Up to 2x life & sprays at up to 50% Lower Pressure. Includes 1/4 in. Superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling. Zinc-plated spring guards are corrosion resistant. By 1/4 in. Maximum working pressure is 3000 psi.

#ad



Graco 244515 1/4" x 1/4", 3000 PSI Magnum Straight Hose Swivel

#ad
Graco Inc. 244515 #ad - Plated spring guards are more corrosion resistant. Consult sprayer manual for maximum hose length supported. This guard is not compatible with Graco's RAC V and IV spray tips. Hose measures 50 ft. The flexible connection also prevents the hose from tangling making it easier to move around the project. Consult sprayer manual for maximum hose length supported.

Graco 244515 1/4" x 1/4", 3000 PSI Magnum Straight Hose Swivel #ad - Up to 2x life & sprays at up to 50% Lower Pressure. Thread. X 1/4 in. Fits graco, wagner, spraytech, Titan and other paint pumps. Replacement part. Installs directly to spray gun. Maximum working pressure is 3000 PSI. Straight hose swivel connector can also be used when pressure rolling to prevent hose twisting. Less overspray & Easiest pattern overlap.

By 1/4 in. Maximum working pressure is 3000 psi. Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs. Fits graco 390, ultra 395 & 495 Models.

#ad



Graco RAC X 515 Airless Spray Tip & Guard Combo RAX515

#ad
Graco RAX515 #ad - You will feel the difference. For use with magnum or Graco Airless Paint Sprayers. Over 10-percent lighter weight and increased hose flexibility improves usability while spraying under pressure. Plated spring guards are more corrosion resistant. Includes 1/4 in. Connector. Superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling.

Hose measures 50 ft. Thread. Installs directly to spray gun. Rac x - the longest lasting fan pattern on the market! Fits spray guns and airless paint hose with 1/4 in. Genuine graco rAC X Tip & Guard. The guard acts as a safety device to prevent a person coming into contact with the tip when spraying and also holds the paint sprayer tip in place.

Graco RAC X 515 Airless Spray Tip & Guard Combo RAX515 #ad - This guard is not compatible with Graco's RAC V and IV spray tips. Fits graco 390, ultra 395 & 495 Models. Maximum working pressure is 3000 PSI. Consult sprayer manual for maximum hose length supported. Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance.

Consult sprayer manual for maximum hose length supported.

#ad



GRACO 246384

#ad
Paint Sundries Solutions 246384 #ad - Fits graco 390, ultra 395 & 495 Models. Zinc-plated spring guards are corrosion resistant. The combo is complete with rac X 515 Tip, RAC X Guard, and tip gasket. The superior locking tab tip design ensures that the tip stays securely in the guard. Consult sprayer manual for maximum hose length supported. This guard is not compatible with Graco's RAC V and IV spray tips.

Connector. Installs directly to spray gun. Rac x - the longest lasting fan pattern on the market! The guard acts as a safety device to prevent a person coming into contact with the tip when spraying and also holds the paint sprayer tip in place. Over 10-percent lighter weight and increased hose flexibility improves usability while spraying under pressure.

GRACO 246384 #ad - You will feel the difference. Delivers the industry's best finish at the lowest airless spray pressure. Featuring the patented Graco RAC X Tip with SmartTip Technology. Additional lengths of hose extends the reach of your sprayer for peaks or second stories without diminishing performance. Fits graco, spraytech, Wagner, Titan and other paint pumps.

Replacement part. Up to 2x life & sprays at up to 50% Lower Pressure.

#ad



Airless Spray Gun Filter 287032 for Contractor II & FTx II, Latex 60 Mesh 5 Packs

#ad
senming wire mesh #ad - Up to 2x life & sprays at up to 50% Lower Pressure. Hose connector measures 1/4 in. The guard acts as a safety device to prevent a person coming into contact with the tip when spraying and also holds the paint sprayer tip in place. Fits all graco products except old-style pole guns. Delivers the industry's best finish at the lowest airless spray pressure.

Airless Spray Gun Filter 287032 for Contractor II & FTx II, Latex 60 Mesh 5 Packs #ad - Consult sprayer manual for maximum hose length supported. Not having the manifold filter can cause damage to your gun and may puncture your hose. For use with magnum or Graco Airless Paint Sprayers. Genuine graco rAC X Tip & Guard. Fits graco 390, ultra 395 & 495 Models. Includes 1/4 in. X 1/4 in. Hose measures 50 ft.

By 1/4 in. Maximum working pressure is 3000 psi. All rac x switchtips include the exclusive OneSeal that can be installed with no tools. For use with st, ultra 395, 495, stx, 595 Airless Sprayers. Airless paint spray gun filter 287032 60 Mesh, Black.

#ad